Why choose electric underfloor heating?
Our electric underfloor heating systems utilise radiant heat. This heats the objects in the room, while traditional convention heaters heat the air.
Water based radiators really on air circulation. The radiator heats the air, the warm air rises and the cycle continues. However, this can cause dust and other allergens to circulate, and causes temperature differentials between the ceiling and floor.
Radiant heat produces a much more even temperature. What’s more, using underfloor heating rather than radiators frees up wall space.
Electric underfloor heating is convenient, cost effective and environmentally friendly.
Feathurs of the soft heating film
* Over 99.69% high heat conversion
* Zero decay, long lifespan over 50 years
* ECO-friendly, dust-free and non-pollution
* Smart switch control
* High insulation 3750V
* Far-infrared ray radiant healthy care
* 10 years warranty
* Core Technology, patent design,IPX7 waterproof
What is the warm up time?
How long it takes to heat the floor will vary, depending on your sub-floor & its insulation. The better the insulation the quicker it will heat up, 30 minutes to an hour on a wooden floor, but it may take several hours on an un-insulated concrete floor. However, on concrete floors it will also retain the heat in the concrete & therefore take much longer to cool down. Warm-up times can be drastically reduced. To as little as 15-20 minutes using an insulated tile-backer board such as Handyheat Tilebacker board.
Resistance to high pressure:
The flexible film can withstand the test voltage up to 3750V, without breakage.
Anti aging:
The flexible film materials are made of special special material, with good characteristics, anti aging, no deterioration, stable performance, and the service life of the same age.
Moisture resistance:
The flexible film is waterproof as a whole. After 48 hours of immersion, it can withstand high pressure test above 3750V, and its performance is normal and no leakage phenomenon. Therefore, it can be used in a wet condition, but we should pay attention to the insulation and waterproof treatment of the connecting part and the cutting part.
FAQ
Why choose the heating film for the floor and not a heating cable?
The heating film is evenly distributed in the floor (without gaps), which means that it better transfers heat onto the floor surface. Thermal control is also more precise. The heating cable can be installed only in the concrete layer. The heating film is installed directly under the flooring with all types of floor coverings (except for tiles). In addition, the installation of the film is much easier on principle and also faster in terms of your house construction.
Product Tags:
|
|
Eco Friendly Carbon Film Underfloor Heating Flexible For Freeway Snow Melting Images
|
